Skip to main content
Language

Select language

English

How to install acoustic panels on battens

By mounting the panels on battens (wooden strips), you create space between the wall and the panel, which enhances sound absorption and allows for hidden installations—such as cables or insulation. This solution is especially recommended for larger rooms, offices, or spaces with high acoustic demands. The batten structure also makes it easier to adjust if the wall is uneven or irregular.

Advantages:
  • Improved acoustic performance
  • Option for hidden cable routing or insulation
  • Easier replacement or repositioning of panels
Video guide
Text guide

Video guide

Guide

If you want the best possible acoustic performance, mounting on battens is the optimal solution. It provides enhanced sound absorption as well as the option to hide cables or wall irregularities.
Step 1

Measure and plan the placement

Start by measuring the wall and planning where your panels will be placed. This will give you an overview of where the battens need to go.
Step 2

Install the battens

Mount 45 mm wooden battens (studs) horizontally on the wall. We recommend a spacing of 600 mm between the battens—this matches the width of standard panels and provides good stability.
Step 3

Add insulation

To achieve optimal sound absorption, you can place mineral wool between the studs. It reduces both echo and noise and makes a noticeable difference in the acoustics.
Step 4

Prepare the panels

If the panels need to be adjusted in length or width, we recommend using a plunge saw or circular saw for a clean and precise cut. To protect the surface, you can place a strip of painter’s tape over the area you plan to cut. This reduces the risk of the surface fraying when the saw cuts through the slats.
Step 5

Mount the panels

Screw the panels directly onto the battens. Drive the screws through the felt and into the wood behind. Use a tape measure or folding ruler to ensure the screws are evenly spaced and neatly aligned.
NOTE!

If you have an electrical outlet

Measure the cutout area and use a plunge saw, circular saw, or Fein cutter to cut through the panel. Use a utility knife to carefully cut the felt. If a slat comes loose, it can easily be reattached with a drop of superglue. If you want a clean and defined finish around the cutout, you can advantageously use our frames, which are designed to provide a neat and professional result.