Quick and easy to assemble
We produce acoustic panels in prefabricated modules, which makes it easy to mount them on both walls and ceilings.
The simple installation makes BY VENØ panels a perfect do-it-yourself project!
DIRECTLY ON WALL:
Assembly glue: Apply the glue to the panel and set it against the wall. Make sure to press it firmly.
Screws: Screw the panel through the felt and into the wall. We recommend using 15 screws per. panel as illustrated in the drawing to the right. Remember to use raw plugs if your wall type requires it.
ON A SHELL:
For optimal sound absorption, set up a formwork with 45 mm studs on your wall. We recommend a distance of 600 mm between your studs. Insert mineral wool between the studs. Screw the panel onto the formwork through the felt.
If you need to adjust your panels in length or width, you can easily cut them to size. When adjusting the length of the panel, we recommend a sharp saw (for example a plunge saw) to cut through both slats and felt. When adjusting the width of the panel, you can use a hobby knife to cut through the felt.